ALL VACANCIES

Service Engineer - High Pressure Compressors -

Commutable from Merseyside or Greater Manchester

Established company now needs a Service Engineer

You must have experience of Compressors.

Working knowledge of compressor electrical and control systems. ( preferable experience of High pressure compressors).

UK & Worldwide travel may be necessary.

Main Duties;

Service, Repair and Maintenance of Industrial Stationary Air Compressors and Associated Equipment in accordance with current regulations, manufacturer recommendations, and industry standards.
Complete strip downs and over-hauls on client machines
Preparation and submission of any certification as required.
Other duties may include delivery/collection of equipment & parts and also assisting other engineers both in the workshops and on site.
Ability to fit in as part of the team.

Basic Salary 35-37K + Overtime ( 8-10K)
Van ( 5 seats), Private use

Must be willing to work away from in the week.

Electrical Service Engineer - Induction Equipment

Full training will be given.

You will need to be qualified or HNC or HND level in electrical or electronic Engineering (or a high degree of technical ability).

You can come from a Maintenance or Technician background but you must be willing to travel as a Service Engineer.

You must live within a commutable distance of Wolverhampton as you will be required to go into the workshop.

You must be technically motivated and interested in a high level of Customer Service.

Your role will be to install, commission and repair high power (1kW to 4MW) induction heating and welding units that are used for a wide variety of industrial processes in the UK and world wide.

In practice because of the size of the units the work is as much mechanical as electrical.

You will be responsible to the Services Manager .

You will be working within the UK and potentially overseas.


Qualifications / experience.
HNC or HND level in electrical/electronics or a high degree of technical ability.
Good familiarity with oscilloscopes and all types of electrical test equipment.

Basic 33-35K
Company vehicle allowance and mobile phone 4.5K
21 Days holiday + bank holidays
Pension contribution
( Car allowances +Day allowances ) 5k+

Machinist / Tool Maker

Ideally you will have experience of working in a precision engineering precision with machining and hand fitting skills.

Ideally you will have experience of tools such as Lathes, mills, drills, press tools drills, and surface grinders.

Key skills; surface grinding, honing, to close tolerances.

The role will be to help assemble build and test high precision machines.

Fit, assemble, and test new tool units and all associated parts and assemblies.
Ensure that the final product is correctly fitted and assembled in accordance with the internal procedure.
Refurbish existing tool units including modifications to an as new condition.
Carry out testing of the tool units in accordance with agreed procedures.
Assist with the building or repair of complete press assemblies when required.
Work as part of the highly skilled mechanical assembly team.
Work in accordance with Company procedures and specific guidelines and terms of reference at all times.

Desirable
Forklift driving license is desirable but not essential for this role.

Remuneration
Good basic salary
Overtime 1.5
37 hour working week
25 days holiday + bank holidays
Company life,Pension

Field Service Engineer - Woodworking Machines.

You must be willing to work away in the week.
You must have good mechanical skills.( This role is mechanically biased gear, blade, chains,bearings,shafts).
You will be trained on the Service of CNC machines and Machine tools. ( full training will be given)
You will have done a formal apprenticeship. (Ideally a NVQ or City and Guilds or HNC / HND
Qualification].
Experience of any electrical fault finding would be a bonus.


You will be covering Central England, Coventry, Birmingham up to Leeds, Hull and Manchester.
You will be working on Woodworking equipment such as; CNCs, Edgebander, sanders, planers, bandsaws and routers.

The role

1. To provide in-house and on-site support to customers for the repair and maintenance ,
2. To complete installations.
3. To carry out on-site customer training and assist with in-house training when required.
4. To repair or replace sub assembly modules.
5. To carry out on-site and in-house upgrades.
6. Be prepared to travel within the UK and stay away in the week.

You will be employed by an international Machine tool manufacturer.

UK driving license.

The Package:

Basic 34-38K + Vehicle, overtime, Company Bonus Scheme, Vehicle, Phone, Laptop, Credit Card, Health Insurance , Dental care cover

Field Service Engineer - Experience of PLCs and controls

You will be working on PLC controlled Industrial equipment used in high-end manufacturing. The role requires
both Mechanical and Electrical skills. Processes include Surface treatment, Precision cleaning and Ultrasonic Cleaning.

These processes often PLC controlled via 24 V Control Panel , ( PLC HMI skills advantageous)

Skills and Background;

ideally you will have worked on PLC controlled machines such as; Machine tools, Packaging or any industrial automation.

You must have experience as a Service Engineer, ( 3 years minimum ).
You must have the ability to read Electrical diagrams and fault find.

Mechanical fault finding and repair. Filters, Hoses, motors and seals. (pneumatics an advantage.)
Preferable is; Electrical Qualification, City and Guilds, 18th Edition or HNC / HND / ONC.
An understanding of Single and three phase electrical systems.

You must be willing to work away in the week ( On average 5-10 days a month) and occasionally overseas.
You must be willing to travel extensively in the UK.

You must be physically fit and willing to work in industrial environments.

Basic 37-45K
Bonus
Car
Pension, mobile phone, laptop, iPad.

Service Engineer - Packaging Machines

The role requires onsite service and potential staying away during the week for 1 to 2 nights per week on average.

As the Service Engineer will be responsible for planning installation, commissioning training, maintenance and service

You will have experience of high speed capital equipment; such as the Food processing, Paper, Print or Packaging industries. ( packaging Machines would be an obvious advantage).

You will be Multi Skilled Engineer. (electrical, mechanical, pneumatics, hydraulics would be beneficial).
Experience of PLC fault finding ( schneider or Siemens) would be a distinct advantage.

You will have good communication skills

The ability to work on your own initiative.

You need to be a strong influencer with excellent commercial acumen.


LOCATION: Oxfordshire
Clean full driving licence

SALARY: 42-46K+ Bonus

Field Service Engineer - Injection Moulding machines

You will be installing commission and Servicing Injection Mould Machines, robots and automation equipment.

You must have experience of Injection Moulding Machines. You must be able to replace Hydraulic, Rams, Seals and Valves.

You must also have some Electrical and Electronic Experience. Understanding of Three Phase Power and Electronic Board level fault Greater Manchester
diagnosis. An Electrical Qualification is preferred.

Once trained you will be expected to repair and service machines in the UK and Ireland. You will be expected to fault find, discuss solutions with customer, order parts etc.

You must be willing to work away in the week.
You must be able to drive.

This role is home based with in the UK.

Basic Salary + Overtime
8 hour days
Vehicle Car
Door to Door travel.
Week day overtime rates
Weekend work bonus
Laptop Phone.

Field Service Engineer Machine tools

Field Service Engineer - Machine tools - High end / High tech.

Field Service Engineer x2 M6 ( Ideally between Manchester and Birmingham) & South South West A34 M4.

You must have come from a CNC machine tool background. Experience of CNC controls especially Siemens and Heidenhain would be a real bonus. Other useful skills ( Siemens 840D, SolutionLine , PowerLine , Heidenhain iTNC530 & TNC640 ).

As a Service Engineer you will perform service and installation of Machine tolls; Millls, Grinders and Lathes at customer locations ,

1. To provide in-house and on-site support to customers.
2. To complete system installations.
3. To carry out on-site customer training and assist with in-house training when required.
4. To repair or replace sub assembly modules and boards related to the operation of any product.
5. To carry out on-site and in-house upgrades.
6. Be prepared to travel at short notice to any location in the UK.

The company are interested in Service Engineer with CNC or Machine tool back ground in a manufacturing environment.
Training will be given.

- maintenance or service background

Base starting pay 40-45K. OTE 60k
Someone with less experience we would have to take a view based on their current package.

Standard 39 hour week
Overtime (standard flat rate Monday-Friday, x1.5 Saturday, x2 Sunday)
All travel time paid at 45 miles = 1 hour
Life Assurance
25 days annual holiday in addition to the Statutory Bank & National holidays
The Company will pay into a Pension scheme at a rate that is 1.5 times the amount paid in by the employee up to a maximum of 7.5%. In essence, if the employee puts in 5%, we would put in 7.5%.
A fully expensed company car

Global Service Engineer - 30/70 Abroad - High Speed Capital Equipment

This role requires extensive World Wide travel.

As the Service Engineer will be responsible for installation, commissioning training, maintenance and service.

You will have experience of high speed capital equipment; such as the Food processing, Paper, Print or Packaging industries.

You will be Mechanically Skilled Engineer. (Other electrical, mechanical,Robotics, pneumatics, hydraulics would be beneficial).

You will have good communication skills

The ability to work on your own initiative.

You need to be a strong influencer with excellent commercial acumen.

30% of your time will be sent in the UK testing and planning installations of equipment.

Full product training.

Benefits/ Package

Home based

Basic
Overtime
Commissions
Car
Bonus
25 days holiday
Pension

Service Engineer - Converting Equipment

This role requires extensive travel.

You will have experience of high speed capital equipment; preferably used in the Paper, Print or Packaging industries.

An ideal candidate could have worked on binders,converting Equipment, slitters, re winder, doctor machines, sheeters or print machinery such as Printing Presses.

You will be a multi- skilled Engineer. (electrical, mechanical, pneumatics, hydraulics, rollers, VS drives PLC controls).

You will have good communication skills
The ability to work on your own initiative.
You need to be a strong influencer with excellent commercial acumen.

30% of your time will be sent in the UK testing and planning installations of equipment.
Experience of Converting Equipment would be a real advantage.
The company invests in training a development of it's engineers

Basic Salary and allowances Annual earnings 45k